This bestselling formula permanently repairs larger leaks in radiators, intake manifolds and gaskets, heater cores, blocks, heads and freeze plugs. It contains an antifreeze-compatible sodium silicate liquid glass formula, so no draining of the cooling system is required. Not to mention, it will not harm the cooling system when used properly.
One Step, No Draining Required
Antifreeze Compatible Sodium Silicate Formula
Permanent Cooling System Repair
Safe for All Cooling Systems
Directions:
Allow engine to cool. Make sure engine is cool enough so radiator cap can be safely removed.
Shake well. Pour Bar’s Leaks Liquid Copper directly into radiator. If using in a small cooling system including all 3 and 4 cylinder engines, use 1/2 bottle.TIP: If direct access to radiator is not available and if overflow tank is pressurized, you can install in tank.
Fill radiator and overflow tank to proper level and reinstall radiator cap. Start engine.
Turn heater on hot and fan on high.
Idle engine for 15 minutes.
Turn vehicle off and allow engine to cool.
Top off (fill up) radiator and leave Bar’s Leaks Liquid Copper in cooling system for continued protection.
Share
Note:¡Please observe the manufacturer's instructions! / Tenga en cuenta las instrucciones del fabricante!
Expected delivery date:
10 Jun
Usually ready in 1-3 days. (Restrictions apply)
This bestselling formula permanently repairs larger leaks in radiators, intake manifolds and gaskets, heater cores, blocks, heads and freeze plugs. It contains an antifreeze-compatible sodium silicate liquid glass formula, so no draining of the cooling system is required. Not to mention, it will not harm the cooling system when used properly.
One Step, No Draining Required
Antifreeze Compatible Sodium Silicate Formula
Permanent Cooling System Repair
Safe for All Cooling Systems
Directions:
Allow engine to cool. Make sure engine is cool enough so radiator cap can be safely removed.
Shake well. Pour Bar’s Leaks Liquid Copper directly into radiator. If using in a small cooling system including all 3 and 4 cylinder engines, use 1/2 bottle.TIP: If direct access to radiator is not available and if overflow tank is pressurized, you can install in tank.
Fill radiator and overflow tank to proper level and reinstall radiator cap. Start engine.
Turn heater on hot and fan on high.
Idle engine for 15 minutes.
Turn vehicle off and allow engine to cool.
Top off (fill up) radiator and leave Bar’s Leaks Liquid Copper in cooling system for continued protection.
