Liqui Moly cleaning and treatment kit for engines with oil consumption, blue exhaust smoke, or minor oil leaks related to aged or hardened seals.
It combines an internal engine cleaning treatment before the oil change with a treatment that helps maintain and regenerate rubber and plastic seals in the engine lubrication system.
Engine oil and oil filter are not included.
Product Information
Liqui Moly Pro-Line Engine Flush – 2037 – 500 ml
Helps remove internal deposits before the oil change and restore proper lubricant flow. One can treats 3 to 5 liters of engine oil.
Liqui Moly Motor Oil Saver – 2020 – 300 ml
Helps maintain and regenerate rubber and plastic seals, reduce oil consumption, minimize minor leaks, and decrease blue exhaust smoke related to aged seals. One can treats 3 to 5 liters of engine oil.
Application: 4-stroke gasoline and diesel engines, with or without turbochargers.
Contents: 2 products.
Engine Oil Included: No.
Oil Filter Included: No.
Directions for Use
- Add Engine Flush to the used engine oil with the engine at operating temperature.
- Let the engine idle for 10 to 15 minutes.
- Turn off the engine and change the engine oil and oil filter.
- Add the new engine oil specified by the vehicle manufacturer.
- Add Motor Oil Saver to the new engine oil while respecting the engine oil capacity.
Technical Note
This kit is a cleaning and treatment solution and does not replace mechanical repairs. It may not correct major leaks, damaged seals, severe wear, internal engine damage, or excessive oil consumption caused by a mechanical failure.
The seal-conditioning effect may begin after approximately 400 to 500 miles of driving.
Always verify the engine oil capacity and the vehicle manufacturer’s recommendations. Do not use in motorcycles or wet clutch systems.
